Welcome : Guest
 Date/Time : September, 05th 2010 / 01:54 PM
 
Search by Manufacturer
Search by Network
PAGE TITLE BANNER GOES HERE

Hypercom T77

  • Diagnostics/Testing Procedures
  • Documentation

  • Diagnostics/Testing Procedures
    Step 1: Press FUNCTION 3

    Step 2: Press ENTER then hold down the CARD VERIFY/OFF LINE/VOID buttons down simultaneeously.

    Step 3: Release the buttons after the terminal rebooted itself. The display should read "PLEASE INITIALIZE OR CALL HELP"

    Step 4: Press FUNCTION 98 then ENTER.

    Step 5: Press Function 99 then ENTER.It will ask for PROGRAM FUNCTION. Press 9 then ENTER. It will say TYPE? Press 1 ENTER,2 ENTER,5 ENTER,6 ENTER than press CANCEL.

    Step 6: Press FUNCTION 2 then ENTER.
    Type in Terminal ID #then ENTER
    Type in INIT. phone # then ENTER
    Type in MNS phone # then ENTER

    Step 7: Press FUNCTION 92 then ENTER to begin downloading. It will take about 15 to 30 minutes to download.

    Step 8: After download is complete,terminal then must be initialized. Press the INITIALIZE key then ENTER and will ask "IS PROGRAM CORRECT" then press ENTER. The terminal will initialize and is then completed.
    Back To Top     Back To FAQs

    © 2010 Bancnet Co. All Rights Reserved | 10849 Kinghurst Drive, Ste. 135, Houston, TX 77099 | Ph: 713.629.0906 | Fx: 713.629.0907