Welcome : Guest
 Date/Time : September, 08th 2010 / 07:05 AM
 
Search by Manufacturer
Search by Network
PAGE TITLE BANNER GOES HERE

Verifone Omni 396

  • Diagnostics/Testing Procedures
  • Documentation

  • Diagnostics/Testing Procedures
    Step 1: Press the ENTER key and the 7 key at the same time.

    Step 2: Enter in the password = 1 alpha,alpha 66831.

    Step 3: Press the BACKSPACE key andit will show "MEMORY TEST" on the display.

    Step 4: Press the ENTER key for o.k.

    Step 5: Press the CLEAR key and hold down until the terminal beeps.

    Step 6: Press the 7 key then the ENTER key and the display will show "EDIT CONFIG"

    Step 7: Press the ENTER key again and the display will show "RECALL WHAT"

    Step 8: Enter in *ZP= by using the alpha key and press ENTER. It should show *ZP=(empty). Press the BACKSPACE key and enter in the download phone number. Press ENTER.

    Step 9: Enter in *ZT= by using the alpha key and press ENTER. It should show *ZT=(empty). Press the BACKSPACE key and enter in the Terminal ID. Press ENTER.

    Step 10: Enter in *ZA= by using the alpha key and press ENTER. It should show *ZA=(empty). Press the BACKSPACE key and enter in the Application number. Press ENTER.

    Step 11: Press the CLEAR key and then press ENTER,0,ENTER for a full download.
    Back To Top     Back To FAQs

    © 2010 Bancnet Co. All Rights Reserved | 10849 Kinghurst Drive, Ste. 135, Houston, TX 77099 | Ph: 713.629.0906 | Fx: 713.629.0907